- UniMachines
- ›
- Injection Molding Machines
- ›
- Plastics Injection Molding Machines
- ›
- Plastics Injection Molding Machines BATTENFELD
- ›
- Plastics Injection Molding Machines BATTENFELD BA 500/200 CD PLUS
Plastics Injection Molding Machine BATTENFELD BA 500/200 CD PLUS
Plastics Injection Molding Machine BATTENFELD BA 500/200 CD PLUS was manufactured by the machine manufacturer BATTENFELD. Machine BATTENFELD BA 500/200 CD PLUS was built in 1991 year.
General data | |
---|---|
Location | Poland |
region | Dolnośląskie |
Year of manufacture | 1991 |
Warranty | Without warranty |
Technical condition | Good |
Payment | Before receipt |
Transport | The buyer organizes the transport at his own cost |
Status | A test can be performed |
Technical parameters | |
---|---|
Clamping force | 50 t |
Injection capacity | 134.7 cm3 |
Injection weight | 122.5 g |
Maximum distance between the plates for mounting the mold | 525 mm |
Length of the injection mold stroke | 375 mm |
Height of the plate for mounting the mold | 150 mm |
Distance between the columns (horizontal) | 304 mm |
Distance between the columns (vertical) | 304 mm |
Length of the ejector stroke | 160 mm |
Screw diameter | 35 mm |
Maximum injection pressure | 148.5 MPa |
Pump power | 11 kW |
Machine length | 3230 mm |
Machine width | 1300 mm |
Machine height | 1840 mm |
Weight of the injection molding machine | 2.5 t |
Equipment | |
---|---|
Unilog 2040 | |
Technical documentation |